UV resistant high-quality green environmental protection
crosslinked polyethylene solar photovoltaic cable
Description:
Black & Red flexible tinned copper with Halogen free Copolymer
Insulation and a UV stable Halogen free Copolymer sheath.
Solar cables should also be resistant to impact, abrasion and tear,
its minimum bending radius should be not more than 4 times of
overall diameter. It should be characterized by its safe pulling
force--50 N/sqmm.The cable’s insulation must withstand thermal and
mechanical loads, and accordingly plastics been cross-linked are
increasingly used today, they not only withstand severe weather
conditions and are suitable for outdoor usage, but also are salt
water resistant, and due to the halogen-free flame resistant
cross-linked jacket material they can be used indoors in dry
conditions.
Envisaging the above information solar energy and its main source
solar cables are very safe, durable, resistant to environmental
impacts and very reliable. What is more important they will do no
harm to the environment and there is no fear that there will be the
power cut off or some other problems, what the majority of the
population is facing during power provision problems. No matter
what, houses or offices will have a guaranteed current and they
will not be interrupted during working, no time is wasted, not much
money is spent and no hazardous fumes are emitted during its
working causing so much damage to heat and to nature.
- Inner Conductor: Flexible Tinned Copper Wire
- Dielectric: LSZH Halogen Free Copolymer
- LSZH Halogen Free Copolymer (UV Resistant)
- Colour: BLACK / RED
- Storage/Operating Temperature: -40°C to +90°C
- Minimum Installation Temperature: -5°C
| Name | PV Cable |
| The product description | Widely used in indoor and outdoor solar installations, electrical
installation, indoor and outdoor, explosion-prone areas, factories,
industrial and agricultural industries. |
| Product features | Low smoke without halogen, good cold, ultraviolet, ozone -
resistant and weather - resistant. |
| Flame retardant, cutting resistance and penetration resistance. |
| Cable protection level Ⅱ level. |
| With 150 ℃ photovoltaic cable radiation as insulation materials,
halogen free flame retardant is halogen-free, non-toxic modified
polyethylene thin hengjing resin as the main raw material, add
halogen-free, non-toxic, flame retardant, heat stabilizer,
eliminate smoke agent, preservative, such as fertilizer, does not
contain halogen, heavy metals, phosphorus. |
| It conforms to ROHS, and the insulation resistance is small after
immersion. |
| Electrical | 1. The dc resistance: the finished cable at 20 ℃ conductive wire
core dc resistance is not greater than 5.09 Ω/km |
| 2. The insulation resistance: the finished insulation resistance of
cable at 20 ℃ should not less than 1014 Ω. Cm, finished cable
insulation resistance at 90 ℃ is not less than 1011 Ω. Cm |
| 3. The sheath surface resistance: resistance of the finished cable
sheath surface should be not less than 109 Ω. |
| Cable structure | Conductor: tinned copper wire 2.5, 4, 6, 10, 16 mm ^ 2 PV1 - F |
| 18, 16 and 14, 12, 10, 8, 6, 4, 2 mm ^ 2 PV wire |
| Insulation: > 0.5mm thick with low smoke and halogen material,
and meet the specified limit of the customer. |
| Sheath: low smoke and halogen free material thickness > 0.5mm. |
| Detailed parameters | Ambient temperature: - 40 ℃ ~ + 90 ℃ |
| The highest temperature of conductor: 120 ℃ (allow 5 s in short
circuit temperature 200 ℃) |
| Limited voltage: AC0.6/1kv dc1.8kv. |
Company introduction
We are a wire factory located in Zhejiang Haiyan, China.
We have professional, high quality machines and testing equipment.
Main business Low voltage power cables, civil wires, audio cables,
fire alarm cables,Control cable and other more than 30 series of
products. The company's service purpose is Integrity-based,
customer satisfaction for the principle. We hope that in the near
future To work with you.
1. Q: Are you a factory or trading company?
A: We’re a factory locates in Zhejiang Province, which integrates
R&D, manufacture and sales of various wires and cables
2. Q: What are your main products?
A: AAC/AAAC/ACSR/ACAR/AACSR/ACSR-AS/ACSS/ACSS-AW/ACS/GSW conductor,
ABC cable, power cable, control cable, concentric
cable,commonelectric wire, etc
3. Q: Can we have our logo or company name to be printed on your
products or the package?
A: Yes, OEM and ODM are both acceptable for us.
4. Q: Do you provide samples? Free or not?
A: Yes, we’d like to provide free samples for your reference, but
won’t bear the express fees.
5. Q: How long is your warranty period?
A: 1 year, and we promise to return or replace the cables within
one year if any quality problem is found.
