Pv1-f solar photovoltaic line 4 square photovoltaic DC line tinned
copper wire single core photovoltaic cable
Having so many environmental problems, because of the waste of
natural resources and not taking care of nature, the earth is
becoming dried out, and the mankind seeks the ways to find
alternative ways, the alternative power energy is already found and
is called Solar Energy, gradually Solar photovoltaic industry is
getting more and more attention as within time their prices go down
and a lot of people considers solar energy as an alternative one
for their offices or house power. They find it cheap, clean and
reliable. On the background of the increased interest towards the
Solar energy, it is expected to increase the demand on solar cables
that consists of tinned copper, 1.5mm, 2.5mm, 4.0mm and etc. will
be described a bit later. The solar cables are the current
transmission mediums of solar energy power generation. They are
nature-friendly and much safer than its predecessors. They are
interconnecting solar panels.
| Name | PV Cable |
| The product description | Widely used in indoor and outdoor solar installations, electrical
installation, indoor and outdoor, explosion-prone areas, factories,
industrial and agricultural industries. |
| Product features | Low smoke without halogen, good cold, ultraviolet, ozone -
resistant and weather - resistant. |
| Flame retardant, cutting resistance and penetration resistance. |
| Cable protection level Ⅱ level. |
| With 150 ℃ photovoltaic cable radiation as insulation materials,
halogen free flame retardant is halogen-free, non-toxic modified
polyethylene thin hengjing resin as the main raw material, add
halogen-free, non-toxic, flame retardant, heat stabilizer,
eliminate smoke agent, preservative, such as fertilizer, does not
contain halogen, heavy metals, phosphorus. |
| It conforms to ROHS, and the insulation resistance is small after
immersion. |
| Electrical | 1. The dc resistance: the finished cable at 20 ℃ conductive wire
core dc resistance is not greater than 5.09 Ω/km |
| 2. The insulation resistance: the finished insulation resistance of
cable at 20 ℃ should not less than 1014 Ω. Cm, finished cable
insulation resistance at 90 ℃ is not less than 1011 Ω. Cm |
| 3. The sheath surface resistance: resistance of the finished cable
sheath surface should be not less than 109 Ω. |
| Cable structure | Conductor: tinned copper wire 2.5, 4, 6, 10, 16 mm ^ 2 PV1 - F |
| 18, 16 and 14, 12, 10, 8, 6, 4, 2 mm ^ 2 PV wire |
| Insulation: > 0.5mm thick with low smoke and halogen material,
and meet the specified limit of the customer. |
| Sheath: low smoke and halogen free material thickness > 0.5mm. |
| Detailed parameters | Ambient temperature: - 40 ℃ ~ + 90 ℃ |
| The highest temperature of conductor: 120 ℃ (allow 5 s in short
circuit temperature 200 ℃) |
| Limited voltage: AC0.6/1kv dc1.8kv. |
Company introduction
We are a wire factory located in Zhejiang Haiyan, China.
We have professional, high quality machines and testing equipment.
Main business Low voltage power cables, civil wires, audio cables,
fire alarm cables,Control cable and other more than 30 series of
products. The company's service purpose is Integrity-based,
customer satisfaction for the principle. We hope that in the near
future To work with you.
1. Q: Are you a factory or trading company?
A: We’re a factory locates in Zhejiang Province, which integrates
R&D, manufacture and sales of various wires and cables
2. Q: What are your main products?
A: AAC/AAAC/ACSR/ACAR/AACSR/ACSR-AS/ACSS/ACSS-AW/ACS/GSW conductor,
ABC cable, power cable, control cable, concentric
cable,commonelectric wire, etc
3. Q: Can we have our logo or company name to be printed on your
products or the package?
A: Yes, OEM and ODM are both acceptable for us.
4. Q: Do you provide samples? Free or not?
A: Yes, we’d like to provide free samples for your reference, but
won’t bear the express fees.
5. Q: How long is your warranty period?
A: 1 year, and we promise to return or replace the cables within
one year if any quality problem is found.
